Registering a Printer from Your Smartphone or Tablet
Before you register the printer and create your user account, you need to connect your printer to the network so that it can be used from a computer. Follow the instructions in the printer's manual to perform the initial setup and network setup.
Note:|
If "Epson Connect Services" is not displayed in your printer's Web Config, register from a computer using Epson Connect Printer Setup.
You cannot use the services under a Wi-Fi Direct or Ad Hoc connection.
|
 |
Turn on the printer.
|
 |
Open the printer's Web Config in a browser.
|
Open the browser and enter your printer’s IP address as shown below.
http://<Printer IP address> (without the < >)
http://<Printer IP address> (without the < >)
You can check your printer’s IP address using one of the following methods. For more information on the network status, see the documentation provided with your printer.
The network status on the printer’s control panel
The network status sheet
The network connection check report
Important:|
When you open Web Config, depending on the printer model, you may be prompted to enter the administrator password. The initial value of the administrator password is the serial number of the printer. Check the label attached to the printer. The label attachment position depends on the product, such as the back, the inside of the cover, or the bottom.
|
 |
Click (tap) Firmware Update, and then follow the instructions to update the printer’s firmware.
|
 |
Click (tap) Epson Connect Services.
|
 |
Click (tap) Register.
|
Note:|
If the setup fails, check for the issue using one of the following methods.
(1) Check Settings > (General Settings) > Web Service Settings > Epson Connect Services on the printer's control panel.
If Registration shows Unregistered, registration with Epson Connect has failed. Check the service status on the Epson Connect portal page. Also, review this FAQ.
If Connection shows Disconnected, the printer is not communicating. Check your internet environment using this FAQ as a reference.
(2) Print the Network Status Sheet (*) from the printer and check the Epson Connect section.
If HTTPS Status does not show Connected, the printer is not communicating. Check your internet environment using this FAQ as a reference.
If XMPP Status does not show Connected, the printer is not communicating. Check your internet environment using this FAQ as a reference.
(*) For instructions on printing the Network Status Sheet, see the printer's manual.
|
 |
Review the Terms of Use and Privacy Statement and select the check boxes.
|
 |
Click (tap) Next.
|
 |
When the following screen is displayed, click (tap) the button according to your needs.
|
For users with an Epson Global ID
|
Click (tap) Login.
|
|
Enter the email address and password registered in Epson Global ID, and then click (tap) Login.
|
|
On the "Two-step Verification" screen, enter the verification code received by email, and then click (tap) Verify.
|
When the printer is registered to the entered user account correctly, a setup information sheet is printed. A notification email is sent to the registered email address.
Epson Connect services are now ready for use.
For users without an Epson Global ID
|
Click (tap) Create Account.
|
|
On the "Register New Epson Global ID" screen, enter an email address and password, select your country or region, and then click (tap) Send Verification Email.
|
An email is sent to the address you registered with the code required for registration.
|
On the "Verify Email Address" screen, enter the verification code you received, and then click (tap) Verify.
|
When the printer is registered to the entered user account correctly, a setup information sheet is printed. A notification email is sent to the registered email address.
Epson Connect services are now ready for use.